Affiliation: | aNetherlands Institute for Metals Research, Rotterdamseweg 137, 2628 AL Delft, The Netherlands bDepartment of Metallurgy, Electrochemistry and Materials Science, Vrije Universiteit Brussel, Pleinlaan 2, B-1050 Brussels, Belgium cDepartment of Materials Science and Engineering, Delft University of Technology, Rotterdamseweg 137, 2628 AL Delft, The Netherlands |
Abstract: | An investigation was performed of the changes that occur in a typical epoxy-coated aluminium system due to exposure to water. The adhesion of the epoxy coating upon exposure to water was evaluated for different exposure temperatures and periods. The adhesion test results showed an initial loss of adhesion of the coating but after this the adhesion improved again and even significantly exceeded adhesion prior to exposure. The amount of adhesion improvement and the speed with which adhesion improvement occurred was found to be larger for higher exposure temperatures. The changes that occur in the epoxy-coated aluminium system due to exposure to water were investigated using a number of different analytical techniques. Based on this, a model was proposed for the processes that take place during exposure and which can explain the adhesion test results. First, the adhesion of the epoxy coating is lost upon exposure due to the accumulation of a significant amount of water at the interface. The water at the interface causes formation and growth of a thin oxyhydroxide layer underneath the epoxy coating. After some time, this oxyhydroxide layer re-establishes contact with the epoxy coating and forms a new, water-stable bond, hence explaining the improvement of the adhesion after its initial loss. The temperature-dependence observed in the adhesion test results is explained by the fact that at a higher exposure temperature, more water accumulates at the interface, the oxyhydroxide layer grows faster and also attains a larger limiting thickness. |