Stress–strain relationship in axial compression for concrete using recycled saturated coarse aggregate |
| |
Authors: | González-Fonteboa Belén Martínez-Abella Fernando Carro López Diego Seara-Paz Sindy |
| |
Affiliation: | 1. School of Civil Engineering, Department of Construction Engineering of the University of A Coruña, ETSI Caminos, Canales, Puertos, Campus Elviña s/n, 15071 La Coruña, Spain;2. School of Civil Engineering, Department of Construction Technology of the University of A Coruña, ETSI Caminos, Canales, Puertos, Campus Elviña s/n, 15071 La Coruña, Spain;3. School of Civil Engineering, University of A Coruña, ETSI Caminos, Canales, Puertos, Campus Elviña s/n, 15071 La Coruña, Spain |
| |
Abstract: | In this work the stress–strain curve of the recycled concretes was determined by replacing different percentages of the natural coarse aggregate with recycled coarse aggregate (20%, 50% and 100%). The results made it possible to establish the differences between the stress–strain relationship of a conventional concrete and this relationship for a recycled concrete depending on the percentage of replacement. In this way, it was found that the longitudinal strain of the recycled concretes increases with the percentage of recycled coarse aggregate used.Finally, using the experimental results, an analytical expression of the stress–strain curve accounting for the percentage of replacement was developed. The verification of the proposed model equation was done by comparing it to the experimental data. The results show that the proposed model equation satisfactorily describes the effect of the recycled aggregate on the stress–strain curve. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|