Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement

Influence of high temperature on the properties of concrete containing non-ground granulated blast-furnace slag (GBFS) and coal bottom ash (BA) as fine aggregate was presented. Six series of concrete mixtures were prepared by partially replacing fine aggregate separately with GBFS and BA. Replacement percentages were between 10 and 50% with an increment of 10% by dry weight of fine aggregate. Then 0.2% polypropylene fibres (PP) were added to last three mixtures that has the same mixture with the first three series. The first series is control concrete, the second series contained GBFS and the third series contained BA. All the concrete specimens were exposed to 800 °C temperature at the age of 90 days. Tests were conducted to determine loss in weight, compressive strength, and dynamic modulus of elasticity. Also surface crack observations were conducted with microscope. Test results showed that it is possible to partially replace fine aggregate with GBFS or BA even if such concretes were to be subjected to high temperature response. Performance of BA concrete was found to be better than GBFS as replacement material.