| 大豆蛋白胶竹材胶合板制作工艺的研究 |
| |
| 引用本文： | 董慧慧,杨光.大豆蛋白胶竹材胶合板制作工艺的研究[J].应用化工,2012,41(7):1179-1183. |
| |
| 作者姓名： | 董慧慧 杨光 |
| |
| 作者单位： | 上海理工大学医疗器械与食品学院,上海,200093 |
| |
| 基金项目： | 上海市科技攻关重点项目，上海市自然科学基金 |
| |
| 摘 要： | 以大豆蛋白胶为竹材胶合板的无甲醛胶黏剂,研究了胶合板的热压工艺。结果表明,大豆蛋白胶的竹材胶合板的最佳热压工艺参数:热压时间50 min,热压压力17 MPa,热压温度140℃,施胶量400 g/m2。在此条件下,胶合板在胶合强度和耐水性方面均高于国家标准Ⅱ类胶合板要求。
|
| 关 键 词： | 竹胶合板 大豆蛋白胶粘剂 热压工艺 |
Study of manufacturing process of bamboo plywood with soy protein adhesive |
| |
| DONG Hui-hui
,
YANG Guang.Study of manufacturing process of bamboo plywood with soy protein adhesive[J].Applied chemical industry,2012,41(7):1179-1183. |
| |
| Authors: | DONG Hui-hui YANG Guang |
| |
| Affiliation: | (School of Medical Instrument and Food Engineering,Shanghai University for Science and Technology,Shanghai 200093,China) |
| |
| Abstract: | Use soy protein adhesive for bamboo plywood no-formaldehyde adhesive,the hot-pressing manufacturing process of plywood was researched.The results showed that bamboo plywood with soy protein adhesive of the optimum hot-pressing technical parameters were obtained as follows: hot-pressing time 50 min,hot-pressing pressure 17 MPa,hot-pressing temperature 140 ℃,the adhesive dosage 400 g/m2.Under this condition,the plywood were higher than requirements of Chinese National Standard for class II plywood in the bonding strength and water resistance. |
| |
| Keywords: | bamboo plywood soy protein adhesive hot-pressing manufacturing process |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
