| 电极隧道窑二次焙烧温度曲线的实验研究 |
| |
| 引用本文： | 隋庆武. 电极隧道窑二次焙烧温度曲线的实验研究[J]. 炭素技术, 1999, 0(2): 1-4 |
| |
| 作者姓名： | 隋庆武 |
| |
| 作者单位： | 吉林炭素集团有限责任公司,吉林132002 |
| |
| 摘 要： | 为了得到最佳电极隧道窑二次焙烧曲线，对二次焙烧的工艺参数———最高气相温度及初始段升温速率进行了实验研究。结果表明，最佳工艺参数：初始温度为２８０℃，最高焙烧温度为７６０℃，６００℃之前的平均升温速率在０９℃／ｍｉｎ，降温速率不大于７℃／ｈ；并给出了理想的二次焙烧曲线
|
| 关 键 词： | 石墨电极 隧道窑 二次焙烧温度曲线 |
THE EXPERIMENTAL STUDY ON TEMPERATURE CURVE OF REBAKING ELECTRODES IN TUNNEL FURNACE |
| |
| Sui Qing wu. THE EXPERIMENTAL STUDY ON TEMPERATURE CURVE OF REBAKING ELECTRODES IN TUNNEL FURNACE[J]. Carbon Techniques, 1999, 0(2): 1-4 |
| |
| Authors: | Sui Qing wu |
| |
| Abstract: | The technical parameterinitial and final temperature in gas phase and the heating rate were studied experimentaly for obtaining optimum temperature curver of rebaking electrodes in tunnel furnaceThe optimum technique parameter is that the initial temperature,the highest temperature and average heating rate below 600 was 280 ,760 and 09 /min respectively,the cooling rate were less than 7 /hThe optimum temperature curve for rebaking electrodes is obtained |
| |
| Keywords: | Graphite electrode turnnel furnace rebaking temperature curve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
