| 改善鞍钢烧结矿冶金性能的试验研究 |
| |
| 引用本文： | 周明顺,翟立委,刘杰,张辉.改善鞍钢烧结矿冶金性能的试验研究[J].烧结球团,2012,37(1):12-16. |
| |
| 作者姓名： | 周明顺 翟立委 刘杰 张辉 |
| |
| 作者单位： | 鞍钢股份有限公司技术中心,辽宁鞍山,114009 |
| |
| 基金项目： | 国家发改委创新能力建设项目“高炉炼铁原料准备技术研究及其平台建设”(项目号:辽经科技[2008]195号);辽宁“百千万人才工程”培养经费资助项目 |
| |
| 摘 要： | 以烧结矿碱度和w(FeO)为出发点,进行了鞍钢烧结矿冶金性能优化试验研究。结果表明:烧结矿碱度增加,低温还原粉化性和还原性得到改善;但碱度过高时,对低温还原粉化和还原性的影响不明显,鞍钢烧结矿适宜碱度为2.05~2.14。w(FeO)提高,烧结矿低温还原粉化性能得到明显改善,但烧结矿还原性变差,综合考虑烧结生产和烧结矿冶金性能,烧结矿适宜w(FeO)应控制在8%左右。
|
| 关 键 词： | 烧结矿 碱度 FeO含量 冶金性能 |
Experimental Research on Improving Metallurgical Properties of Ansteel Sinter |
| |
| ZHOU Ming-shun
,
ZHAI Li-wei
,
LIU Jie
,
ZHANG Hui.Experimental Research on Improving Metallurgical Properties of Ansteel Sinter[J].Sintering and Pelletizing,2012,37(1):12-16. |
| |
| Authors: | ZHOU Ming-shun ZHAI Li-wei LIU Jie ZHANG Hui |
| |
| Affiliation: | (Technology center of Angang Steel Company Limited,Anshan 114009,Liaoning) |
| |
| Abstract: | In this paper,taking the sinter basicity and the w(FeO)content as controlled variables,the experimental study on optimization of metallurgical properties of Ansteel sinter was carried on.The result shows that low-temperature reduction disintegration index(RDI) and reducibility index(RI) improve with the increase of sinter basicity,but too high basicity has no obvious effect on reduction disintegration and reducibility of sinter,therefore,the proper basicity of Ansteel sinter should be 2.05～2.14.The low temperature reduction disintegration property improves obviously with the increase of FeO,but reducibility of sinter becomes worse,therefore,the proper FeO content of Ansteel sinter should be controlled around 8.00%. |
| |
| Keywords: | sinter basicity FeO content metallurgical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
