Heat transfer between a fluidized bed and an immersed vertical U-tube |
| |
Authors: | S.C. Saxena A. Chatterjee |
| |
Affiliation: | Department of Energy Engineering, University of Illinois at Chicago Circle, Box 4348, Chicago, IL 60680, U.S.A. |
| |
Abstract: | The design details of a 0.254 m stainless steel cylindrical fluidized bed pilot plant facility, whose fabrication, installation and testing have been recently completed, are described. It primarily consists of a fluidized-bed reactor, fluidizing air-supply system, solids feeder, off-gas cleaning and exhaust system, and cooling water-supply system for heat-transfer tubes provided in the bed and in the freeboard sections. The plant is operated at ambient pressure in the temperature range 300–600 K, both in the batch and continuous modes for solids feed. Bed-pressure drop measurements as a function of fluidizing velocity for two different bed heights reveal that the quality of fluidization is good. Similar experiments have been conducted with the continuous solids feed. The heat-transfer coefficient between the bed and an immersed stainless steel U-tube is measured as a function of fluidizing air velocity at five different temperatures. The effects on bed-to-tube heat-transfer rate of solids feed rate, bed height, air-flow rate, and bed temperature are examined. All of these observed variations are interpreted in terms of the solids mixing and bubble mechanics in the bed. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|