首页 | 本学科首页   官方微博 | 高级检索  
     

利用激光全息技术校正大口径光学成像系统像差
引用本文:唐敏学,沈为民.利用激光全息技术校正大口径光学成像系统像差[J].光学精密工程,2007,15(9):1347-1352.
作者姓名:唐敏学  沈为民
作者单位:1. 苏州大学江苏省现代光学技术重点实验室,江苏,苏州,215006;苏州大学信息光学工程研究所,江苏,苏州,215006
2. 苏州大学江苏省现代光学技术重点实验室,江苏,苏州,215006;苏州大学现代光学技术研究所,江苏,苏州,215006
摘    要:基于光学全息原理,分析了激光全息技术校正光学成像系统像差的机理和方法,建立了全息记录实验系统,用于校正口径500 mm、低质量球面反射镜光学系统对有限远物体成像时的像差。采用原光路再现的方法,通过比较像差校正前后的干涉图样和成像结果,验证了该校正方法的可行性。实验结果表明,校正后该系统剩余波像差约为λ/8。

关 键 词:全息术  光学成像系统  大口径反射镜  像差校正
文章编号:1004-924X(2007)09-1347-06
收稿时间:2007-01-30
修稿时间:2007-01-30

Aberration correction of a large aperture optical imaging system by holography
TANG Min-xue,SHEN Wei-min.Aberration correction of a large aperture optical imaging system by holography[J].Optics and Precision Engineering,2007,15(9):1347-1352.
Authors:TANG Min-xue  SHEN Wei-min
Affiliation:1. Jiangsu Province Key Laboratory of Modern Optical Technology, Soochow University, Suzhou 215006,China; 2. Institute of Information Optics Engineering ,Soochow University , Suzhou 215006,China;3. Modern Optical Technology Institute, Soochow University, Suzhou 215006,China
Abstract:Based on the principle of holography,the working mechanism and holographic correction method of an aberrated optical imaging system was described and analyzed in detail. An experimental system was established for the aberration correction in an optical system with a low quality and 500 mm diameter spherical mirror for finite object imaging. By comparing the interferograms and images obtained before and after correction, the feasibility of the correction method was verified. The experimental results show diffraction-limited performance of the system and residual aberration is about λ/8.
Keywords:holography  optical imaging system  large aperture mirror  aberration correction
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《光学精密工程》浏览原始摘要信息
点击此处可从《光学精密工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号