| 以工件材料作为修整电极的球面ELID精密磨削试验研究 |
| |
| 引用本文： | 佟富强,张勇,张飞虎. 以工件材料作为修整电极的球面ELID精密磨削试验研究[J]. 金刚石与磨料磨具工程, 2010, 30(1): 16-19,24. DOI: 10.3969/j.issn.1006-852X.2010.01.004 |
| |
| 作者姓名： | 佟富强 张勇 张飞虎 |
| |
| 作者单位： | 哈尔滨工业大学机电工程学院,哈尔滨,150001 |
| |
| 基金项目： | 国家自然科学基金资助项目(50375040);;总装备部预研项目-超精密复合加工与检测技术 |
| |
| 摘 要： | 针对小球面硬质合金精密磨削的技术难题,尝试对硬质合金做ELID(Electrolytic In-process Dressing)成形范成法凹球面磨削试验。因为被加工凹球面直径小,受空间限制无法解决修整电极的安装问题,又由于硬质合金工件自身导电性良好,因此采用以工件做电极的ELID磨削试验方案。考虑到磨削过程中的火花放电现象对磨削表面质量的负面影响,设计"间歇电解修锐ELID磨削"(简称ELID-Ⅱ)和"连续电解修锐ELID磨削"(简称ELID-Ⅲ)两种方案进行试验。初步试验结果为:"ELID-Ⅱ"磨削后表面粗糙度值为Ra0.12μm和球面度误差6.99μm,"ELID-Ⅲ"获得表面粗糙度值为Ra0.53μm和球面度误差57.76μm,"ELID-Ⅱ"优于"ELID-Ⅲ"。
|
| 关 键 词： | ELID磨削 修整 凹球面 电极 |
Workpiece material as electrode in ELID dressing during precision grinding of spherical surface |
| |
| Tong Fuqiang,Zhang Yong,Zhang Feihu. Workpiece material as electrode in ELID dressing during precision grinding of spherical surface[J]. Diamond & Abrasives Engineering, 2010, 30(1): 16-19,24. DOI: 10.3969/j.issn.1006-852X.2010.01.004 |
| |
| Authors: | Tong Fuqiang Zhang Yong Zhang Feihu |
| |
| Affiliation: | School of Mechatronics Engineering;Harbin Institute of Technology;Harbin 150001;China |
| |
| Abstract: | Aiming at the technical difficulties of precision grinding of small spherical surface carbide,ELID(electrolytic in-process dressing) grinding for concave spherical surface carbide by generating method is conducted.The diameter of concave spherical is very small,and the electrodes can't be installed because of limited space.Furthermore,the carbide workpiece itself has good electrical conductivity,so the workpiece material is used as the electrode during ELID grinding experimental study.In respect of the nega... |
| |
| Keywords: | ELID grinding dressing concave electrode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
