首页 | 本学科首页   官方微博 | 高级检索  
     

程控增益低噪声宽带直流放大器的设计
引用本文:孙科学,卜新华,唐珂.程控增益低噪声宽带直流放大器的设计[J].现代电子技术,2012,35(3):188-190.
作者姓名:孙科学  卜新华  唐珂
作者单位:1. 南京邮电大学电子科学与工程学院,江苏南京,210046
2. 石家庄邮电职业技术学院电信工程系,河北石家庄,050021
基金项目:南京邮电大学青蓝计划(NY210036)资助项目;教改项目(JG003311JX26)资助
摘    要:介绍了程控增益低噪声宽带直流放大器的设计原理及流程。采用低噪声增益可程控集成运算放大器AD603和高频三极管2N2219和2N2905等器件设计了程控增益低噪声宽带直流放大器,实现了输入电压有效值小于10mV,输出信号有效值最大可达10V,通频带为0~8MHz,增益可在0~50dB之间5dB的步进进行控制,最高增益达到53dB,且宽带内增益起伏远小于1dB的两级宽带直流低噪声放大器的设计。

关 键 词:低噪声  程控增益  功率放大  宽带直流放大器

Design of low noise programmable gain wide-band DC amplifier
SUN Ke-xue , BU Xin-hua , TANG Ke.Design of low noise programmable gain wide-band DC amplifier[J].Modern Electronic Technique,2012,35(3):188-190.
Authors:SUN Ke-xue  BU Xin-hua  TANG Ke
Affiliation:1(1.College of Electronics Science and Engineering,Nanjing University of Posts and Telecommunications,Nanjing 210046,China; 2.Telecommunications Engineering Department,Shijiazhuang Posts and Telecommunications Technology Vocational College,Shijiazhuang 050021,China)
Abstract:The design philosophy and flow of low noise programmable gain wide-band DC amplifier are presented.The fabricated low noise amplifier was cascaded with low noise integrated programmable gain op-amp AD603 and high-frequency transistor 2N2219 and 2N2905 and other devices.The input voltage is less than 10 mV,the output signal is 10 V,pass band is 0~8 MHz,the maximum gain is 53 dB,and the gain in 0~50 dB,5 dB step can be controlled by the microcontroller.In addition,fluctuation in gain and bandwidth is less than 1dB of the two level wide-band low-noise DC amplifier.
Keywords:low noise  programmable gain  power amplifier  wide-band DC amplifier
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号