| 不等距立铣刀切削力模型的建立及试验分析 |
| |
| 引用本文： | 李海斌,何宁,李亮.不等距立铣刀切削力模型的建立及试验分析[J].工具技术,2010,44(12):10-13. |
| |
| 作者姓名： | 李海斌 何宁 李亮 |
| |
| 作者单位： | 南京航空航天大学 |
| |
| 基金项目： | 国家科技支撑计划课题资助项目(2008BAF32B09) |
| |
| 摘 要： | 在特定铣削条件下,建立了多齿不等距铣刀的切削力模型,并通过正交试验验证所建的切削力模型;通过分析不同的切削参数对切削力系数的影响,综合确定了在小切削宽度铣削过程中合理选用切削参数的基本原则。
|
| 关 键 词： | 切削力模型 不等齿距 立铣刀 切削参数 |
Modeling of Milling Force and Experiment Analysis for End Milling with Variable Pitch |
| |
| Li Haibin,He Ning,Li Liang.Modeling of Milling Force and Experiment Analysis for End Milling with Variable Pitch[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2010,44(12):10-13. |
| |
| Authors: | Li Haibin He Ning Li Liang |
| |
| Affiliation: | Li Haibin,Postgraduate,College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China,He Ning,Li Liang |
| |
| Abstract: | Firstly,under certain milling conditions,a milling force model of the multi-tooth end milling with variable pitch is established,and the model of milling force could be verified through the orthogonal experiment.Then,with analyzing the influence of different cutting parameters on cutting force coefficient.The basic principles of rational selection of cutting parameters are determined comprehensively in small cutting width milling process. |
| |
| Keywords: | cutting force model variable pitch end milling cutting parameters |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
