| 亚麻/聚丙烯复合材料的成型工艺和拉伸性能研究 |
| |
| 引用本文： | 崔萍,楚晓,艾宏玲,陈莉萍.亚麻/聚丙烯复合材料的成型工艺和拉伸性能研究[J].玻璃钢/复合材料,2010(2):41-43. |
| |
| 作者姓名： | 崔萍 楚晓 艾宏玲 陈莉萍 |
| |
| 作者单位： | 兰州理工大学,甘肃兰州,730050 |
| |
| 摘 要： | 本文探讨了亚麻/聚丙烯纤维复合材料的制备工艺和拉伸性能.对亚麻纤维含量分别为30%、40%、50%、60%、70%的复合材料进行比较,分析增强纤维含量对复合材料拉伸性能的影响;对模压温度分别为150℃、160℃、170℃、180℃、190℃的复合材料进行比较,分析模压温度对复合材料拉伸性能的影响,最后确定模压温度及亚麻/聚丙烯纤维的混合比.
|
| 关 键 词： | 亚麻/聚丙烯纤维 复合材料 拉伸性能 模压温度 混合比 |
STUDYING OF PREPARATION PROCESSING AND TENSILE PROPERTIES OF THE FLAX/POLYPROPYLENE COMPOSITES |
| |
| CUI Ping,CHU Xiao,AI Hong-ling,CHEN Li-ping.STUDYING OF PREPARATION PROCESSING AND TENSILE PROPERTIES OF THE FLAX/POLYPROPYLENE COMPOSITES[J].Fiber Reinforced Plastics/Composites,2010(2):41-43. |
| |
| Authors: | CUI Ping CHU Xiao AI Hong-ling CHEN Li-ping |
| |
| Affiliation: | CUI Ping,CHU Xiao,AI Hong-ling,CHEN Li-ping(Lanzhou University of Technology,Lanzhou 730050,China) |
| |
| Abstract: | In this paper,preparation processing and tensile properties of the flax/polypropylene fibers compos-ites are discussed. The tensile strength of samples with different flax fiber contents are investigated by comparing five kinds of composites with fiber-reinforced contents of 30wt% ,40wt% ,50wt% ,60wt% ,70wt%. The tensile strength of samples with different molded temperature are also investigated by comparing five kinds of composites with molded temperature of 150℃, 160℃, 170℃, 180℃ and 190℃, then the right molded temperature and the best blending ratio are determined. |
| |
| Keywords: | flax/polypropylene fibers composites tensile properties molded temperature blending ratio |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
