Prediction of dynamic recrystallization condition by deformation efficiency for Al 2024 composite reinforced with SiC particle |
| |
Authors: | Byung-Chul Ko Yeon-Chul Yoo |
| |
Affiliation: | (1) School of Materials Science and Engineering, Inha University, Inchon, 402-751, Korea;(2) School of Materials Science and Engineering, Inha University, Inchon, 402-751, Korea |
| |
Abstract: | Hot torsion test has been carried out for Al 2024 composite reinforced with 8 m SiCp (15 vol.%) to suggest optimum hot working condition for dynamic recrystallization (DRX) at the temperature range of 320 to 520 °C and strain rate range of 0.1 to 3.0/sec. Flow curve and deformed microstructure have been analyzed to identify the hot restoration mechanism of DRX. Processing map showing the variation of the deformation efficiency expressed by 2m/(m + 1)], where m is the strain rate sensitivity, with temperature and strain rate has been described for the composite. The characteristics of domain of DRX and peak efficiency of the composite have been analyzed by observing deformed microstructure. The composite showed 40–50% efficiency at the DRX domain (370–460 °C, 0.1–0.5/sec). Also, the variation of deformation efficiency with Zener-Hollomon parameter (Z = exp(Q/RT)) were discussed to find out optimum hot working condition for DRX of the composite. It is found that the optimum temperature and strain rate condition for DRX of the composite is 430–450 °C and 0.5/sec. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|