| 叠层注射模的应用与设计 |
| |
| 引用本文： | 阎亚林,黄晓燕.叠层注射模的应用与设计[J].模具工业,2003(12):31-34. |
| |
| 作者姓名： | 阎亚林 黄晓燕 |
| |
| 作者单位： | 成都电子机械高等专科学校,四川成都,610031 |
| |
| 摘 要： | 叠层注射模是具有2层或2层以上型腔的特殊注射模具 ,在制件生产批量大等条件下代替传统注射模成型 ,可以获得不变更设备而使产量翻倍 ,经济效益明显提高的效果。为了推广应用该模具技术 ,对此类模具的设计原理、成型特点及应用范围作了详细的阐述 ,并结合实例介绍了叠层注射模的设计方法 ,以供应用与设计参考
|
| 关 键 词： | 注射模 锁模力 型腔 重叠 应用 设计 |
| 文章编号： | 1001-2168(2003)12-0031-04 |
| 修稿时间： | 2002年7月16日 |
Application and Design of the Stacked Injection Mould |
| |
| YAN Ya_lin,HUANG Xiao_yan.Application and Design of the Stacked Injection Mould[J].Die & Mould Industry,2003(12):31-34. |
| |
| Authors: | YAN Ya_lin HUANG Xiao_yan |
| |
| Abstract: | The stacked injection mould is a special injection mould with two or more layers of cavities, taking the place of the conventional injection mould under the condition of big batch production to multiple the production output with the same equipment. The design principle, moulding characteristics and application scope of the stacked injection mould were stated in detail. With a practical example, the method for designing the mould was introduced, serving as a reference for the application and design of similar moulds. |
| |
| Keywords: | injection mould locking force cavity stack application design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
