| 热交换器用镍基合金UNS N06600无缝管生产工艺研究 |
| |
| 引用本文： | 李洪东,倪明贵,石军. 热交换器用镍基合金UNS N06600无缝管生产工艺研究[J]. 钢管, 2008, 37(2): 11-15 |
| |
| 作者姓名： | 李洪东 倪明贵 石军 |
| |
| 作者单位： | 四川长城钢管有限公司,四川,江油,621701;四川长城钢管有限公司,四川,江油,621701;四川长城钢管有限公司,四川,江油,621701 |
| |
| 摘 要： | 简述了热交换器用镍基合金UNSN06600无缝管的基本性能、制造技术特点以及开发UNSN06600无缝管生产工艺的过程,最后确定了采用“斜轧热穿孔开坯＋全冷轧”生产工艺。通过对成品管进行力学性能检测和微观组织分析可知,采用该工艺生产的镍基合金UNSN06600钢管满足ASMESB163标准的要求。
|
| 关 键 词： | 镍基合金UNS N06600无缝管 生产工艺 性能指标 微观组织分析 |
| 文章编号： | 1001-2311(2008)02-0011-05 |
Research on Manufacture Process for Nickel-base Alloy UNS N06600 Seamless Steel Tube for Heat Exchanger Service |
| |
| Li Hongdong,Ni Minggui,Shi Jun. Research on Manufacture Process for Nickel-base Alloy UNS N06600 Seamless Steel Tube for Heat Exchanger Service[J]. Steel Pipe, 2008, 37(2): 11-15 |
| |
| Authors: | Li Hongdong Ni Minggui Shi Jun |
| |
| Affiliation: | ( Sichuan Changcheng Steel Pipe Co., Ltd., Jiangyou 621701, China ) |
| |
| Abstract: | Briefed in the paper are the main aspects concerning the nickel-base alloy UNS N06600 seamless steel tube for heat exchanger service,covering the basic properties,characteristics of the manufacture technolo-gy and the course of development of the manufacturing process for the said tube.The finally determined manufac-turing process is the process of"billet hot piercing with rotary rolling process + completely cold-rolling".The results of testing of the mechanical properties and microstructure analysis of the finished tube show that the nickel-base alloy UNS N06600 seamless steel tube as made by the above said manufacture process is up to relevant re-quirements as specified in Standard ASME SB 163. |
| |
| Keywords: | Nickel-base alloy UNS N06600 seamless steel tube Manufacturing process Property targets Microstructure analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
