首页 | 本学科首页   官方微博 | 高级检索  
     

添加剂对中钛炉渣性能的影响
引用本文:张旭升,吕庆,刘小杰,郄亚娜.添加剂对中钛炉渣性能的影响[J].过程工程学报,2014,14(5):809-815.
作者姓名:张旭升  吕庆  刘小杰  郄亚娜
作者单位:河北联合大学冶金与能源学院 河北联合大学冶金与能源学院 东北大学材料与冶金学院 河北联合大学冶金与能源学院
摘    要:以河北钢铁集团承德钢铁集团有限公司现场高炉渣为基准,用化学纯试剂配制渣样,考察了添加剂对中钛炉渣粘度、熔化性温度的影响. 结果表明,炉渣碱度为1.12, CaF2含量为0.5%~2%, Fe2O3含量约为5%, Al2O3含量约为13.75%, MgO含量约为13.95%, MnO含量约为5%(w)时,有利于降低炉渣粘度和熔化性温度;添加Ce2O3使炉渣熔化性温度和粘度升高,不利于生产.

关 键 词:中钛高炉渣  添加剂  粘度  熔化性温度  
收稿时间:2014-8-18
修稿时间:2014-9-3

Effects of Additives on Properties of Molten Medium-titanium Slag
ZHANg Xu-sheng LV Qing LIU,Xiao-jie QIE Na-ya.Effects of Additives on Properties of Molten Medium-titanium Slag[J].Chinese Journal of Process Engineering,2014,14(5):809-815.
Authors:ZHANg Xu-sheng LV Qing LIU  Xiao-jie QIE Na-ya
Affiliation:College of Metallurgy & Energy, Hebei United University College of Metallurgy & Energy, Hebei United University Material and metallurgy college of Northeastern University College of Metallurgy & Energy, Hebei United University
Abstract:Based on the blast furnace slag from Chengde Iron and Steel Company in Hebei Iron and Steel Group, the slag samples were prepared with chemical reagents, and the effects of additives on the viscosity and melting temperature of medium-titanium blast furnace slag investigated. The results show that when the basicity of slag is 1.12, the content of CaF2 0.5%~2%, Fe2O3 about 5%, Al2O3 13.75%, MgO 13.95% and MnO 5%(w), it is conducive to improving the slag melting temperature and viscosity. Ce2O3 added to the slag makes melting temperature and viscosity increase, which is not conducive to the production.
Keywords:medium-titanium blast furnace slag  additive  viscosity  melting temperature  
点击此处可从《过程工程学报》浏览原始摘要信息
点击此处可从《过程工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号