|
|||||
|
|
| 微合金元素对700MPa级低碳贝氏体钢组织与性能的影响 | |
| 引用本文： | 曹慧泉,颜慧成,夏政海,罗登,李广敏,仇圣桃. 微合金元素对700MPa级低碳贝氏体钢组织与性能的影响[J]. 钢铁钒钛, 2009, 30(4): 27-31 |
| 作者姓名： | 曹慧泉 颜慧成 夏政海 罗登 李广敏 仇圣桃 |
| 作者单位： | 1. 钢铁研究总院国家连铸技术工程研究中心,北京,100081;湖南华菱管线股份有限公司,湖南,长沙,410011 2. 钢铁研究总院国家连铸技术工程研究中心,北京,100081 3. 湖南华菱湘潭钢铁有限公司,湖南,湘潭,411101 |
| 摘 要： | 通过对700 MPa级低碳贝氏体钢静态CCT曲线及不同冷却速度下组织的分析,研究了两组不同Ti、Nb含量的低碳贝氏体钢的组织、性能。结果表明,Ti、Nb含量的增加促使抗拉强度、屈服强度提高,但是Ti含量过量时对低温冲击功是不利的;wTi=0.015%-0.025%、wNb=0.04%-0.05%可满足700 MPa级别低碳贝氏体钢的强度与韧性要求,该成分钢在TMCP处理后采用回火工艺,可以获得理想的力学性能。 |
| 关 键 词： | 低碳贝氏体钢 微合金元素 微观组织 力学性能 |
Effects of Microalloy Element on Microstructure and Mechanical Properties of 700 MPa Low Carbon Bainitic Steel |
|
| Cao Huiquan,Yan Huicheng,Xia Zhenghai,Luo Deng,Li Guangmin,Qiu Shengtao. Effects of Microalloy Element on Microstructure and Mechanical Properties of 700 MPa Low Carbon Bainitic Steel[J]. Iron Steel Vanadium Titanium, 2009, 30(4): 27-31 | |
| Authors: | Cao Huiquan Yan Huicheng Xia Zhenghai Luo Deng Li Guangmin Qiu Shengtao |
| Affiliation: | Cao Huiquan1,2,Yan Huicheng1,Xia Zhenghai3,Luo Deng3,Li Guangmin1,Qiu Shengtao1 (1.National Engineering Research Center of Continuous Casting Technology,Central Iron & Steel Research Institute,Beijing 100081,China,2.Hunan Valin Steel Tube & wire Co.,Ltd.,Changsha 410011,Hunan,3.Hunan Valin's Xiangtan Steel Co.,Xiangtan 411101,China) |
| Abstract: | The microstructure and mechanical properties of low carbon bainitic steels with different Nb and Ti content are investigated by analyzing CCT curves of 700 MPa series low carbon bainitic steel.The result shows that the increment of Ti/Nb improves the tensile and yield strength of bainitic steel.Excessive Ti content is adverse to the low temperature impact Energy.Nb 0.04%~0.05% and Ti 0.015%~0.025% are the suitable content for 700 MPa low carbon bainitic steel.Qualified mechanical properties of steel are obt... |
| Keywords: | low carbon bainitic steel microalloy element microstructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |