| 磁控式气囊抛光实验研究 |
| |
| 引用本文： | 张才,计时鸣,金明生,张利. 磁控式气囊抛光实验研究[J]. 轻工机械, 2012, 0(5): 16-20 |
| |
| 作者姓名： | 张才 计时鸣 金明生 张利 |
| |
| 作者单位： | 特种装备制造与先进加工技术教育部／浙江省重点实验室浙江工业大学,浙江杭州310014 |
| |
| 基金项目： | 国家自然科学基金项目（50575208）;浙江省自然科学基金项目（M503099）;浙江省科技厅重点科研工业资助项目（2006C21041） |
| |
| 摘 要： | 基于磁控式气囊抛光实验平台,对抛光中的不同加工区域进行针对性的实验研究。首先,以材料去除率和加工工件表面粗糙度为目标,通过正交试验法获取加工接触区各个相应参数的影响程度以及优选方案;其次,对加工非接触区以不同的抛光形式进行实验对比,得到各自的抛光效果,以及粗糙度随时间变化曲线。
|
| 关 键 词： | 磁控式气囊抛光 材料去除率 正交试验 |
Experimental Investigation of Magnetic Control Gasbag Abrasive Polishing |
| |
| ZHANG Cai,JI Shiming,JIN Mingsheng,ZHANG Li. Experimental Investigation of Magnetic Control Gasbag Abrasive Polishing[J]. Light Industry Machinery, 2012, 0(5): 16-20 |
| |
| Authors: | ZHANG Cai JI Shiming JIN Mingsheng ZHANG Li |
| |
| Affiliation: | (Key l,ahoratory of E＆M (Zhejiang University of Technology), Ministry of Education ＆ Zhejiang Province,Hangzhou 310014,China) |
| |
| Abstract: | According to different polishing areas, the pertinence experimental researches were carried out based on the magnetic gasbag polishing experimental platform. Firstly, aiming at material removal rate and surface roughness of workpiece, the influence extent of each appropriate process parameters and parameters optimization in contact area were obtained by orthogonal experiment method ; Secondly, by the experiments compared with two different forms of polishing in non-contact area, thus the respective polishing effect and the changing curves of surface roughness with the time are obtained. |
| |
| Keywords: | magnetic control gasbag abrasive polishing material removal rate orthogonal experiment method |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
