| 铝合金薄壁圆柱壳切削稳定性研究 |
| |
| 引用本文： | 林滨,陈东,韩植林,张宝兴,张磊. 铝合金薄壁圆柱壳切削稳定性研究[J]. 兵工学报, 2012, 33(7): 847-851 |
| |
| 作者姓名： | 林滨 陈东 韩植林 张宝兴 张磊 |
| |
| 作者单位： | （天津大学 装备设计与制造技术重点实验室, 天津 300072) |
| |
| 基金项目： | 国家科技重大专项:高档数控机床与基础制造装备 |
| |
| 摘 要： | 对于圆柱壳的加工，由工件材料的性能和结构特点，可知其相对刚度较低，加工工艺性差，易变形，在加工中易产生振动。再生型切削颤振是机床切削振动的主要原因。在现有文献的基础上研究了圆柱壳再生型切削颤振系统极限切削宽度随机床主轴转速变化的规律，并通过动态测试实验、模态实验和动态切削力实验，对切削系统的动力学参数进行识别，最终得到了圆柱壳切削系统稳定性极限图，并在传统稳定性的基础上提出严格稳定区的概念。
|
| 关 键 词： | 机械制造工艺与设备 薄壁圆柱壳 切削稳定性 严格稳定区 稳定图 |
| 收稿时间： | 2011-02-25 |
Research on the Cutting Stability of Thin Cylindrical Shell of Aluminum Alloy |
| |
| LIN Bin , CHEN Dong , HAN Zhi-lin , ZHANG Bao-xing , ZHANG Lei. Research on the Cutting Stability of Thin Cylindrical Shell of Aluminum Alloy[J]. Acta Armamentarii, 2012, 33(7): 847-851 |
| |
| Authors: | LIN Bin CHEN Dong HAN Zhi-lin ZHANG Bao-xing ZHANG Lei |
| |
| Affiliation: | (Tianjin Key Lab of Equipment Design & Manufacturing Technology, Tianjin University, Tianjin 300072, China) |
| |
| Abstract: | The thin cylindrical shell has a relatively low stiffness and poor processing,and is easy of deforming and vibrating during processing because of its material properties and structural characteristics.Regenerative chatter is a main vibration reason of cutting machine tools.The law of limit cutting width of regenerative chatter varying with the speed of spindle was researched.The kinetic parameters of cutting system were identified through the dynamic test,model experiment and dynamic cutting forces.Finally,the diagram of cutting stability of thin cylindrical shell was obtained.Furthermore,the area of strict stability was proposed compared with traditional stability. |
| |
| Keywords: | machinofature technique and equipment thin cylindrical shell cutting stability area of strict stability diagram of stability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
