首页 | 本学科首页   官方微博 | 高级检索  
     

高性能AlGaN/GaN HEMT的肖特基特性
引用本文:田秀伟,冯震,王勇,宋建博,张志国. 高性能AlGaN/GaN HEMT的肖特基特性[J]. 微纳电子技术, 2009, 46(2)
作者姓名:田秀伟  冯震  王勇  宋建博  张志国
作者单位:中国电子科技集团公司第十三研究所,石家庄050051
摘    要:研究了Al GaN/GaN HEMT制备中相关工艺对器件肖特基特性的影响,并对工艺进行了优化。首先研究了表面处理对器件肖特基势垒特性的影响,对不同的表面处理方法进行了比较,发现采用氧等离子体处理,并用V(HF)∶V(H2O)=1∶5溶液清洗刻蚀后的表面,可以有效减小表面态密度,未经处理的样品肖特基接触理想因子为2.6,处理后理想因子减小到1.8。对Si N钝化膜的折射率与肖特基特性的关系进行了研究,发现Si N钝化膜的折射率为2.3~2.4时,钝化对肖特基特性的影响较小,但反向泄漏电流较大。

关 键 词:GaN高电子迁移率晶体管  肖特基接触  理想因子  泄漏电流  表面处理  表面钝化

Schottky Characteristic of High Performance AlGaN/GaN HEMT
Tian Xiuwei,Feng Zhen,Wang Yong,Song Jianbo,Zhang Zhiguo. Schottky Characteristic of High Performance AlGaN/GaN HEMT[J]. Micronanoelectronic Technology, 2009, 46(2)
Authors:Tian Xiuwei  Feng Zhen  Wang Yong  Song Jianbo  Zhang Zhiguo
Affiliation:The 13th Research Institute;CETC;Shijiazhuang 050051;China
Abstract:The effects of several related technologies on schottky characteristic of AlGaN/GaN HEMTs were investigated,and the technologies were optimized.The effects of surface treatment on the schottky characteristic were investigated,the different surface treatment methods were compared.It is found that the density of surface states is reduced effectively by using O2 plasma etching the surface of AlGaN and cleaning the surface with the solution of V(HF)∶V(H2O)=1∶5.The ideal factor reduces from 2.6 to 1.8 comparing with the sample without surface treatment before schottky metals are deposited.The relationship between the refractive index of SiN passivation film and the schottky characteristic was investigated,indicating that the effect of passivation on schottky characteristic is less at refractive index of 2.3-2.4,but the reverse leakage current is still higher.
Keywords:GaN HEMT  schottky contact  ideal factor  leakage current  surface treatment  surface passivation  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号