| 动力水龙头壳体焊接工艺 |
| |
| 引用本文： | 刘宏亮,郭晓江,柳锁贤. 动力水龙头壳体焊接工艺[J]. 焊接, 2004, 0(12): 31-33 |
| |
| 作者姓名： | 刘宏亮 郭晓江 柳锁贤 |
| |
| 作者单位： | 宝鸡石油机械有限责任公司,721002;宝鸡石油机械有限责任公司,721002;宝鸡石油机械有限责任公司,721002 |
| |
| 摘 要： | 针对动力水龙头壳体结构复杂、材料焊接性差的特点，按美国ASME IX要求进行了焊接工艺评定，并根据评定结果确定了焊接工艺参数，制定出合理的工艺方案，使动力水阀壳体顺利焊接成功，取得了良好的经济效益。
|
| 关 键 词： | 动力水龙头壳体 焊接工艺评定 焊接工艺方案 经济效益 |
| 修稿时间： | 2004-07-12 |
WELDING PROCEDURE OF DYNAMIC HYDROVALVE CASE |
| |
| Baoji Oilfield Machinery Co.,Ltd. Liu Hongliang,Guo Xiaojiang,Liu Shuoxian. WELDING PROCEDURE OF DYNAMIC HYDROVALVE CASE[J]. Welding & Joining, 2004, 0(12): 31-33 |
| |
| Authors: | Baoji Oilfield Machinery Co. Ltd. Liu Hongliang Guo Xiaojiang Liu Shuoxian |
| |
| Abstract: | Pointing to the complicated structure and poor weldability of dynamic hydrovalve case, the welding procedure qualifications were carried out according to the ASME IX. The welding parameters were determined and the welding procedure plan was established. Dynamic hydrovalve case was welded successfully and the good economic benefit was acqired. |
| |
| Keywords: | dynamic hydrovalve case welding procedure qualification welding procedure plan economic benefit |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
