| 磨削金属/陶瓷合成部件的砂轮连续修整 |
| |
| 引用本文： | 陈世林.磨削金属/陶瓷合成部件的砂轮连续修整[J].武汉理工大学学报,1992(2). |
| |
| 作者姓名： | 陈世林 |
| |
| 作者单位： | 武汉工业大学机械工程系 |
| |
| 基金项目： | 该课题得到德国研究协会(DFG)的资助。 |
| |
| 摘 要： | 本文以磨削过程的平稳为目标,在用金刚石砂轮磨削铸铁/高压氮化硅合成部件时,采用了对砂轮的连续修整技术。研究表明,保持其它磨削条件不变,选择合适的连续修整参数,可以使得磨削过程中磨削力、工件表面粗糙度保持稳定。与普通修整法相比,连续修整不仅降低了磨削力,磨削比也有一定的改善。
|
| 关 键 词： | 磨削 金刚石砂轮 金属/陶瓷合成部件 连续修整 |
The Grinding of Metal/Ceramic-- Hybridcomponent with Continuous Dressing |
| |
| Chen Shilin Dept. of Mechanical Engineering,Wuhan University of Technology.The Grinding of Metal/Ceramic-- Hybridcomponent with Continuous Dressing[J].Journal of Wuhan University of Technology,1992(2). |
| |
| Authors: | Chen Shilin Dept of Mechanical Engineering Wuhan University of Technology |
| |
| Abstract: | Because of the different properties of metal and ceramic, it is much more difficult tofind suitable grinding conditions in the grinding of metal/ceramic-hybridcomponent. In this paperthe continuous dressing was used in the grinding of Iron/HPSN-hybridcomponent with diamontwheel in order to stabilize the grinding process. The experiments showed that an ideal grinding pro-cess can be realise by continuous dressing method. Compared with uncontinuous dressing the grindingforce was reduced and the grinding ratio was improved. |
| |
| Keywords: | grinding diamont wheel metal/ceramic-hybridcomponent continuous dressing |
| 本文献已被 CNKI 等数据库收录！ |
