| 基于VISUAL BASIC的圆盘拉伸工艺计算机程序设计 |
| |
| 引用本文： | 杨斌,施飞. 基于VISUAL BASIC的圆盘拉伸工艺计算机程序设计[J]. 稀有金属, 2002, 26(4): 310-313 |
| |
| 作者姓名： | 杨斌 施飞 |
| |
| 作者单位： | 南方冶金学院材料与化工学院,赣州,341000 |
| |
| 摘 要： | 通过对一些圆盘拉伸工艺计算过程的分析 ,在充分比较各工艺计算模型的优缺点的基础上 ,选择了合适的工艺计算模型 ,并根据该模型的工艺计算原理和实际生产经验 ,以VisualBasic为前端开发平台 ,以Access2 0 0 0为后端数据库 ,编写了圆盘拉伸工艺工艺设计程序。该程序不仅界面美观 ,操作性强 ,参数修改方便 ,结果显直观 ,而且还运用多种方法处理和优化工艺 ,使设计结果能很好地符合生产实际。该程序可用于原有工艺的优化和新工艺和制订 ,具有一定的实用价值。
|
| 关 键 词： | VISUAL BASIC 圆盘拉伸工艺 计算机程序设计 |
| 文章编号： | 0258-7076(2002)04-0310-04 |
| 修稿时间： | 2001-09-16 |
Computer Program Design for Disk-Drawing Technology Based on Visual Basic |
| |
| Yang Bin and Shi Fei. Computer Program Design for Disk-Drawing Technology Based on Visual Basic[J]. Chinese Journal of Rare Metals, 2002, 26(4): 310-313 |
| |
| Authors: | Yang Bin and Shi Fei |
| |
| Abstract: | Based on the study of the disk drawing technology calculation process and understanding of its merits and demerits, and by use of good technology model, a program based according to the principle of the model and production practice was developed with Visual Basic and Access 2000. Not only do it has a friendly interface, is convenient to operation, is easy to parameter alteration and is suitable to audio visual display, but also uses methods to handle technology parameters in order to conform to reality of production. It is used to optimize old technology and work new one. It is fit for practical need. |
| |
| Keywords: | Visual Basic Disk drawing Computer program design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
