首页 | 本学科首页   官方微博 | 高级检索  
     

乳化液润滑复合塑料轴承的弹流润滑分析
引用本文:刘本海,王优强.乳化液润滑复合塑料轴承的弹流润滑分析[J].润滑与密封,2009,34(3).
作者姓名:刘本海  王优强
作者单位:青岛理工大学机械工程学院,山东青岛,266033
基金项目:山东省自然科学基金,青岛市科技发展计划项目 
摘    要:利用考虑惯性力的Reynolds方程,对乳化液润滑条件下复合塑料轴承的弹流润滑问题进行了数值模拟,讨论了载荷、转速和轴承轴径大小对乳化液膜压力和膜厚的影响.结果表明:在乳化液润滑条件下,惯性力对乳化液膜压力的影响很小,而对乳化液膜厚度的影响较大;随着载荷的增大,压力峰值有明显增大,而在入口区压力随载荷增大而减小,膜厚以及最小膜厚随载荷减小而明显增大;转速和轴承轴径大小对乳化液膜压力的影响不明显,而膜厚以及最小膜厚随转速增大而明显增大,随轴承轴径的增大而减小.

关 键 词:乳化液润滑  惯性力  弹流润滑

The Elastohydrodynamic Lubrication Analysis of Emulsion-lubricated Composite Plastic Bearing
Liu Benhai,Wang Youqiang.The Elastohydrodynamic Lubrication Analysis of Emulsion-lubricated Composite Plastic Bearing[J].Lubrication Engineering,2009,34(3).
Authors:Liu Benhai  Wang Youqiang
Affiliation:School of Mechanical Engineering;Qingdao Technological University;Qingdao Shandong 266033;China
Abstract:Based on the Reynolds equation considering the inertia force,the numerical simulation of elastohydrodynamic lubrication(EHL) for emulsion-lubricated composite plastic bearing was made,the effects of the load,the speed and the shaft diameter on the pressure and the film thickness were discussed.The results show that the inertia force has little effect on the pressure and great effect on the thickness under emulsion-lubricated condition.The pressure peak is increased greatly and the pressure is decreased at i...
Keywords:
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号