| 基于热加工图的20CrMnTiH钢热成形性能及斜齿轮热成形模拟 |
| |
| 引用本文： | 秦飞,冯玮. 基于热加工图的20CrMnTiH钢热成形性能及斜齿轮热成形模拟[J]. 锻压技术, 2017, 42(3). DOI: 10.13330/j.issn.1000-3940.2017.03.026 |
| |
| 作者姓名： | 秦飞 冯玮 |
| |
| 作者单位： | 武汉理工大学材料科学与工程学院,湖北武汉430070;现代汽车零部件技术湖北省重点实验室,湖北武汉430070 |
| |
| 基金项目： | 国家自然科学基金资助项目，湖北省自然科学基金资助项目 |
| |
| 摘 要： | 针对齿轮材料20Cr Mn Ti H钢的热加工工艺优化的需求,建立了其基于动态材料模型(DMM)的不同应变下的热加工图,揭示了应变对其加工性能的影响规律,得到了成形过程中的安全区和失稳区,并获得了该材料最佳热加工工艺窗口。结合有限元组织模拟和微观组织观察分析,验证了热加工图的可靠性和其热变形组织模拟的准确性。基于DEFORM-3D建立了斜齿轮变形-传热-微观组织演化耦合的有限元模型,结合热加工图所获得的优化变形温度和变形速率区间,模拟分析了斜齿轮热精密成形微观变形规律。
|
| 关 键 词： | 20CrMnTiH钢 热加工图 斜齿轮 精密锻造 有限元模拟 动态再结晶 |
Hot formability of steel 20CrMnTiH based on hot processing map and simulation on hot forming of helical gear |
| |
| Qin Fei,Feng Wei. Hot formability of steel 20CrMnTiH based on hot processing map and simulation on hot forming of helical gear[J]. Forging & Stamping Technology, 2017, 42(3). DOI: 10.13330/j.issn.1000-3940.2017.03.026 |
| |
| Authors: | Qin Fei Feng Wei |
| |
| Abstract: | According to the requirement of hot processing optimization for steel 20CrMnTiH,the hot processing maps were established under different strains based on the dynamic material model (DMM),and the influences of strain on the hot workability were explored.Then,the safe region and instable region were determined,and the optimal hot processing window also could be obtained.Furthermore,combining microstructural observation and FEM simulation of microstructure,the reliability of hot processing map and the accuracy of microstructural simulation were verified.At last,the coupled finite element model of helical gear was established by DEFORM-3D,and the micro-deformation evolution laws were simulated by the optimal deformation temperature and strain rate region obtained by hot processing maps,which provided the theoretical and technical foundations for the hot forming of helical gear. |
| |
| Keywords: | steel 20CrMnTiH hot processing map helical gear precision forming FEM dynamic recrystallization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
