| 工艺参数对薄壁铜管游动芯头振动拉拔过程拉拔力影响分析 |
| |
| 引用本文： | 许永强,姜志宏,胡沛,曾艳祥,李旭.工艺参数对薄壁铜管游动芯头振动拉拔过程拉拔力影响分析[J].锻压技术,2017,42(3). |
| |
| 作者姓名： | 许永强 姜志宏 胡沛 曾艳祥 李旭 |
| |
| 作者单位： | 江西理工大学机电工程学院,江西赣州,341000 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 在金属塑性成形中加入振动,可以有效降低材料变形抗力并提高产品质量。以薄壁铜管游动芯头拉拔为研究对象,分析了振动对铜管拉拔过程中拉拔力的影响,并通过有限元分析软件MARC,对不同的工艺参数(拉拔速度、外模模角和芯头锥角)进行数值模拟。研究结果表明:针对本模型,存在一个最佳外模半锥角和芯头锥角组合(外模半锥角α为12°,芯头锥角β为9°),使得薄壁铜管游动芯头振动拉拔过程中的拉拔力最小,而拉拔速度对拉拔力的影响较小。
|
| 关 键 词： | 薄壁铜管 游动芯头振动拉拔 拉拔力 数值模拟 振动 |
Influence of process parameters on drawing force in the floating plug vibration drawing process of thin-walled copper tube |
| |
| Xu Yongqiang,Jiang Zhihong,Hu Pei,Zeng Yanxiang,Li Xu.Influence of process parameters on drawing force in the floating plug vibration drawing process of thin-walled copper tube[J].Forging & Stamping Technology,2017,42(3). |
| |
| Authors: | Xu Yongqiang Jiang Zhihong Hu Pei Zeng Yanxiang Li Xu |
| |
| Abstract: | The vibration adding in metal plastic forming can effectively reduce the deformation resistance of material and improve the quality of products.Thus,for the thin-wall copper tube floating plug drawing,the influence of vibration on the drawing force of copper tube in the drawing process was analyzed,and different process parameters (drawing speed,external mold angle and cone angle) were simulated by the finite element analysis software MARC.The result shows that based on this model,the best parameter combination with the half cone angle of external die of 12°and the plug cone angle of 9°exists.Thus,the drawing force in the floating plug vibration drawing process of thin-walled copper tube is the minimum,and the influence of drawing speed on the drawing force is smaller. |
| |
| Keywords: | thin walled copper tube vibration drawing of floating plug drawing force numerical simulation vibration |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
