首页 | 本学科首页   官方微博 | 高级检索  
     

常化温度对二次冷轧无取向硅钢组织和磁性能的影响
引用本文:贾成义,张文康,冯占卫,苗晓. 常化温度对二次冷轧无取向硅钢组织和磁性能的影响[J]. 电工材料, 2010, 0(4): 23-24,31
作者姓名:贾成义  张文康  冯占卫  苗晓
作者单位:[1]太钢冷轧硅钢厂,太原030003 [2]太钢技术中心,太原030003
摘    要:研究了二次冷轧工艺常化温度对冷轧无取向硅钢薄带组织结构和磁性能的影响。结果表明,采用两次冷轧法工艺时,对热轧板进行常化能改善硅钢薄带的磁性能。当常化温度低于中间退火温度时,常化对改善铁损的作用不明显,但对提高磁感有一定作用;当常化温度高时,常化可以显著改善磁性能,特别是当中间退火温度较低时,提高常化温度的作用更大。

关 键 词:二次冷轧  常化温度  无取向硅钢  组织  磁性能

Effect of Normalizing Temperature on Microstructure and Texture of Double Cold Reduced Non-oriented Silicon Steel Sheets
JIA Cheng-yi,ZHANG Wen-kang,FENG Zhan-wei,MIAO Xiao. Effect of Normalizing Temperature on Microstructure and Texture of Double Cold Reduced Non-oriented Silicon Steel Sheets[J]. Electrical Engineering Materials, 2010, 0(4): 23-24,31
Authors:JIA Cheng-yi  ZHANG Wen-kang  FENG Zhan-wei  MIAO Xiao
Affiliation:1.Silicon Steel cold rolling mill of Taiyuan Iron & Steel Co.Ltd,Taiyuan 030003,China;2.Technology center of Taiyuan Iron & Steel Co.Ltd,Taiyuan 030003,China)
Abstract:The effect of normalizing temperature on microstructure and texture of non-oriented silicon steel sheets when adopting double cold reduction has been studied.Results showed that the magnetic properties of non-oriented silicon steel could be improved by double cold rolling after normalized.When normalizing temperature lower than intermediate anneal temperature,core less could not be reduced remarkably by adopting normalizing technology,but magnetic induction could get a little benefit.When normalizing temperature was increased,the magnetic properties were improved obviously.Especially when the intermediate anneal temperature was lower at the same time,the improvement of the magnetic properties was even more.
Keywords:double cold reduction  normalizing temperature  non-oriented silicon steel sheets  microstructure  magnetic properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号