Abstract: | In order to achieve appropriate mechanical properties, new high strength steels aimed for the car industry have to be alloyed with solution strengthening elements. The annealing treatment undergone on cold rolled sheets induces the selective oxidation of alloying elements such as Al, Mn, Si and Cr. The formed oxides exhibit a poor wetting by the Zn bath during hot dip galvanising, thus deteriorating the properties of the zinc coating. While surface‐segregating elements get oxidised, they interact with each other through the formation of spinels and/or mixed oxides during annealing and oxides which have a deleterious effect on wetting can be formed. The formation of (Mn, B) oxide was observed on alloys containing even very small amounts of B and this oxide is almost not wetted at all by Zn. Boron is added to interstitial‐free steels to improve the cold work embrittlement, by replacing phosphorus at the grain boundaries. In this paper, the selective oxidation of steels with and without B, in 5 vol. % H2‐N2 atmosphere at 820°C and different dew points was investigated. We found a very strong effect of segregation and oxidation of B on Si and S segregation and oxidation behaviour. |