| 离心泵扩散管计算机辅助交互设计方法研究 |
| |
| 引用本文： | 赵林明,刘建国,何春燕. 离心泵扩散管计算机辅助交互设计方法研究[J]. 河北工程大学学报(自然科学版), 2007, 24(1): 83-85 |
| |
| 作者姓名： | 赵林明 刘建国 何春燕 |
| |
| 作者单位： | 河北工程大学,教务处,河北,邯郸,056038;河北工程大学,教务处,河北,邯郸,056038;河北工程大学,教务处,河北,邯郸,056038 |
| |
| 基金项目： | 河北省科技攻关计划项目(00212148) |
| |
| 摘 要： | 在应用计算机辅助设计技术进行离心泵的三维实体设计中,离心泵扩散管是由梯形断面到圆形断面过渡的不规则曲面,必须建立设计扩散管的数学模型。本文采用计算几何中的Bezier曲线,绘制出扩散管的中心线及垂直于中心线的断面图形,在MDT环境下进行放样,生成扩散管的三维实体造型,成功地解决了相关问题,并将此方法应用于离心泵的叶轮、悬架等零部件的三维实体造型设计,实现了离心泵整体三维造型设计。
|
| 关 键 词： | 离心泵 扩散管 计算机辅助设计 |
| 文章编号： | 1673-9469（2007）01-0083-03 |
| 收稿时间： | 2006-11-30 |
| 修稿时间： | 2006-11-30 |
Study on computer aided interaction design for diffuser of centrifugal pump |
| |
| ZHAO Lin-ming,LIU Jian-guo,HE Chun-yan. Study on computer aided interaction design for diffuser of centrifugal pump[J]. Journal of Hebei University of Engineering(Natural Science Edition), 2007, 24(1): 83-85 |
| |
| Authors: | ZHAO Lin-ming LIU Jian-guo HE Chun-yan |
| |
| Affiliation: | Educational Administration, Hebei University of Engineering, Handan 056038, China |
| |
| Abstract: | As centrifugal pump diffuser has irregular curved surface which transits from trapezoidal section to circular cross section,when using computer aided design technology to carry through the integrated design of centrifugal pumps,mathematical model of the diffuser needed to be built.In this paper,using Bezier curves which belongs to computational geometry,the diffuser centerline and the cross section which was vertical to the centerline were are drawn up,setting out with MDT,the three-dimensional sliding-model was formed and related problems was solved.This method was also used in the three-dimensional sliding-model of centrifugal pump impellers,suspensions and so on,actualized the integrated three-dimensional sliding model design of centrifugal pumps. |
| |
| Keywords: | centrifugal pumps diffuser computer aided design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
