| 激光预制裂纹槽的断裂分析 |
| |
| 引用本文： | 赵勇,杨慎华,郑祺峰,金文明.激光预制裂纹槽的断裂分析[J].吉林大学学报(工学版),2011(4):984-987. |
| |
| 作者姓名： | 赵勇 杨慎华 郑祺峰 金文明 |
| |
| 作者单位： | 吉林大学辊锻工艺研究所; |
| |
| 基金项目： | 国家自然科学基金项目(50375066); 高等学校博士学科点专项科研基金项目(20060183066); 吉林大学“985工程”项目 |
| |
| 摘 要： | 进行了单边激光加工裂纹槽试样轴向拉伸试验。试样取自用高碳微合金非调质钢(C70S6)锻造的连杆。分析了激光预制裂纹槽对材料断裂的影响,并与线切割和拉削加工裂纹槽拉伸断裂试样进行了断口分析和断裂载荷的对比。结果表明:采用激光预制裂纹槽试样的断口具有最小的裂尖塑性变形区域,与有相同裂纹槽深度的线切割和拉削加工裂纹槽试样相比,其拉伸断裂载荷分别小20%和30%左右。在试验结果基础上确定了激光加工裂纹槽的等效临界应力强度因子为25.51 MPa.m1/2。本文结果可用于激光预制裂纹槽的连杆裂解载荷参数计算。
|
| 关 键 词： | 材料合成与加工工艺 激光 裂纹槽 单边裂纹轴向拉伸试样 连杆 裂解 等效临界应力强度因子 |
Fracture analysis of specimen with crack notch processed by laser |
| |
| ZHAO Yong,YANG Shen-hua,ZHENG Qi-feng,JIN Wen-ming.Fracture analysis of specimen with crack notch processed by laser[J].Journal of Jilin University:Eng and Technol Ed,2011(4):984-987. |
| |
| Authors: | ZHAO Yong YANG Shen-hua ZHENG Qi-feng JIN Wen-ming |
| |
| Affiliation: | ZHAO Yong,YANG Shen-hua,ZHENG Qi-feng,JIN Wen-ming(Roll Forging Institute,Jilin University,Changchun 130022,China) |
| |
| Abstract: | The tensile test was done for the axial tensile specimen with single edge crack notch processed by laser.The specimen was sampled from the connecting rod blank forged by the high-carbon micro-alloyed non-hardening-and-tempering steel(S70S6).The influence of the laser processed single edge notch on the tensile fracture of specimen was analyzed,and the fractography and the fracture load of the specimen with the laser notch were compared with the specimens with the notches processed by wire cut electrical disc... |
| |
| Keywords: | materials synthesis and process technology laser notch axial tensile specimen with single edge crack connecting rod fracture splitting equivalent critical stress intensity factor |
| 本文献已被 CNKI 等数据库收录！ |
