首页 | 本学科首页   官方微博 | 高级检索  
     

柴油氧化吸附脱硫工艺的研究
引用本文:李会鹏,赵华.柴油氧化吸附脱硫工艺的研究[J].化工科技,2011,19(3):10-12.
作者姓名:李会鹏  赵华
作者单位:辽宁石油化工大学石油化工学院,辽宁抚顺,113001
基金项目:辽宁省博士启动基金资助项目(20081104)
摘    要:以过氧化氢为氧化剂,甲酸为催化剂,Al2O3为吸附剂,研究柴油氧化吸附脱硫工艺条件。实验结果表明,在n(氧)∶n(硫)=10.0,氧化时间为40min,氧化温度为70℃,V(吸附剂)∶V(油)=1∶5.5,吸附时间为30min,吸附温度为40℃时,吸附柴油的脱硫率为97.32%,柴油w(硫)=20.5μg/g,达到欧洲Ⅳ柴油标准:w(总硫)〈50μg/g。

关 键 词:柴油  氧化  吸附  脱硫

Study on the desulfurization of diesel fuel by oxidative adsorption
LI Hui-peng,ZHAO Hua.Study on the desulfurization of diesel fuel by oxidative adsorption[J].Science & Technology In Chemical Industry,2011,19(3):10-12.
Authors:LI Hui-peng  ZHAO Hua
Affiliation:LI Hui-peng,ZHAO Hua(School of Petrochemical Engineering,Liaoning Shihua University,Fushun 113001,China)
Abstract:Oxidative adsorption method was adopted to remove the sulfur compounds in diesel fuel by using hydrogen peroxide as oxidation agent,formic acid as catalyst and Al2O3 as adsorbent,respectively.The results showed that under the optimum conditions of a molar ratio of oxygen to sulfur of 10,an oxidation reaction time of 40 min,a reaction temperature of 70 ℃,a sorbent to oil ratio of 1∶5.5(by volume),and an adsorption time of 30 min,an adsorption temperature of 40 ℃,the sulfur removal rate was 97.32%.The sulfur content of the treated diesel fuel was only 20.5 μg/g,which met the requirement of the European Emission Standard IV.
Keywords:Diesel  Oxidation  Adsorption  Desulfurization  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号