首页 | 本学科首页   官方微博 | 高级检索  
     

Mg-Cu-Zn 相变储热材料充放热特性研究
引用本文:程晓敏,陶冰梅,万清舟,李翠,李元元.Mg-Cu-Zn 相变储热材料充放热特性研究[J].武汉理工大学学报(信息与管理工程版),2014(3):332-336.
作者姓名:程晓敏  陶冰梅  万清舟  李翠  李元元
作者单位:武汉理工大学材料科学与工程学院,湖北武汉430070
基金项目:国家科技支撑计划基金资助项目(2012BAA05B05);国家自然科学基金资助项目(51206125).
摘    要:设计并搭建了套管式中高温蓄热系统实验装置,采用Mg-Cu-Zn合金相变储热材料,空气为传热介质,利用Fluent软件对该套管式蓄热装置进行了数值模拟和充放热实验,分析了传热介质流量对蓄热装置充放热特性的影响,评价了蓄热装置的放热效率。结果表明,模拟结果与实验数据吻合较好,实验结果为中高温蓄热系统的优化设计和工程应用提供了理论依据。

关 键 词:套管式蓄热系统  放热性能  相变材料  数值模拟

Heat Charge and Discharge Characteristics of Phase Change Thermal Storage of Mg-Cu-Zn
CHENG Xiaomin,TAO Bingmei,WAN Qingzhou,LI Cui,LI Yuanyuan.Heat Charge and Discharge Characteristics of Phase Change Thermal Storage of Mg-Cu-Zn[J].Journal of Wuhan University of Technology(Information & Management Engineering),2014(3):332-336.
Authors:CHENG Xiaomin  TAO Bingmei  WAN Qingzhou  LI Cui  LI Yuanyuan
Affiliation:CHENG Xiaomin, TAO Bingmei, WAN Qingzhou, LI Cui, LI Yuanyuan
Abstract:Casing type high temperature thermal energy storage ( TES ) unit was designed and constructed .The TES unit contains Mg-Cu-Zn alloy as phase change material , air as heat transfer fluid ( HTF) .Fluent software was used to perform numerical simulation, and experiments were carried out to examine the effects of flow rate of HTF on the performance of the storage unit.The efficiency of heat discharging process was adopted as the index of thermal storage equipment heat exchange performs . The results show that the trends of numerical results and experimental data are in close agreement ; the maximum error between them is only 6%.The results laid a theoretical foundation for optimization design and engineering application of high temperature TES.
Keywords:casing type thermal energy storage unit  characteristics of heat discharge  phase change material  numerical simulation
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号