A common approach to characterizing autostereoscopic and polarization‐based 3‐D displays

Abstract— Autostereoscopic and polarization‐based stereoscopic 3‐D displays recreate 3‐D images by providing different images in the two eyes of an observer. This aim is achieved differently for these two families of 3‐D displays. It is shown that viewing‐angle measurements can be applied to characterize both types of displays. Viewing‐angle luminance measurements are made at different locations on the display surface for each view emitted by the display. For autostereoscopic displays, a Fourier‐optics instrument with an ultra‐high‐angular‐resolution VCMaster3D is used. For polarization‐based displays, a standard Fourier‐optics instrument with additional glass filters is used. Then, what will be seen by an observer in front of the display is computed. Monocular and binocular quality criteria (left‐ and right‐eye contrast, 3‐D contrast) was used to quantify the ability to perceive depth for any observer position. Qualified monocular and binocular viewing spaces (QMVS and QBVS) are deduced. Precise 3‐D characteristics are derived such as maximum 3‐D contrast, optical viewing freedom in each direction, color shifts, and standard contrast. A quantitative comparison between displays of all types becomes possible.