首页 | 本学科首页   官方微博 | 高级检索  
     

氯化丁基橡胶/聚丙烯共混改性的研究
引用本文:柳学义,蔺玄晋,周胜利. 氯化丁基橡胶/聚丙烯共混改性的研究[J]. 特种橡胶制品, 2004, 25(4): 21-23
作者姓名:柳学义  蔺玄晋  周胜利
作者单位:1. 华北工学院,化学工程系,山西,太原,030051
2. 山西新华化工厂,山西,太原,030008
摘    要:采用橡胶与塑料共混改性的方法,制备了具有较好加工工艺性能的氯化丁基橡胶/聚丙烯共混物。研究了橡塑共混比、共混温度以及硫化时间对共混物力学性能的影响。结果表明:氯化丁基橡胶/聚丙烯共混配比为90/10,炭黑30份,氧化锌5份,氧化镁2份,促进剂DM2份,促进剂TMTD1份,硬脂酸1份时,可获得综合性能良好的共混胶料。

关 键 词:氯化丁基橡胶 聚丙烯 共混改性
文章编号:1005-4030(2004)04-0021-02
修稿时间:2003-10-25

Study on Blending Modification of CIIR/PP
LIU Xue-yi,LING Xuan-jin,ZHOU Sheng-li. Study on Blending Modification of CIIR/PP[J]. Special Purpose Rubber Products, 2004, 25(4): 21-23
Authors:LIU Xue-yi  LING Xuan-jin  ZHOU Sheng-li
Affiliation:LIU Xue-yi~1,LING Xuan-jin~1,ZHOU Sheng-li~2
Abstract:The chloroisobutylene-isoprene rubber(CIIR)/polypropylene(PP) mixture with properties of high oil resistance and inflaming retarding were prepared by mixed and modified of the rubber and plastics.The effects of the blending ratio,blending temperature and blending time on the properties of the mixture was studied.The results indicated that the optimum condition was as follow:CIIR/PP 90/10,carbon black 30phr,zinc oxide 5phr,magnesinm 2phr,accelerator DM 2phr,accelerator TMTD 1phr.
Keywords:chloroisobutylene-isoprene rubber  polypropylene  blending modification
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号