首页 | 本学科首页   官方微博 | 高级检索  
     

220dtex/18f PA66 FDY生产工艺简介
引用本文:张建一,侯建国,王秀艳.220dtex/18f PA66 FDY生产工艺简介[J].合成纤维工业,2005,28(5):54-55.
作者姓名:张建一  侯建国  王秀艳
作者单位:大连青松机电设备制造有限公司,辽宁,大连,116001;大连华纶化纤工程有限公司,辽宁,大连,116023;大连轻工业学院,辽宁,大连,116024
摘    要:探讨了切片干燥、纺丝、冷却等工艺条件对生产220 dtex/18f PA66 FDY的影响。结果表明:干燥后切片含水率为300-500 μg/g,纺丝温度282℃,上油率为1.0%,侧吹风有效吹风高度1 800 mm,卷绕速度3 500 m/min,生产稳定,纤维质量优良。

关 键 词:聚己二酰己二胺纤维  全拉伸丝  纺丝  工艺
文章编号:1001-0041(2005)05-0054-02
修稿时间:2005年3月9日

Brief introduction of 220 dtex/18 f PA66 FDY technological process
Zhang Jianyi,Hou Jianguo,Wang Xiuyan.Brief introduction of 220 dtex/18 f PA66 FDY technological process[J].China Synthetic Fiber Industry,2005,28(5):54-55.
Authors:Zhang Jianyi  Hou Jianguo  Wang Xiuyan
Abstract:The effects of chips drying, spinning and cooling conditions on the production of 220 dtex/18 f PA66 FDY were discussed. The results showed that the top-quality PA66 FDY can be produced smoothly under the conditions as followed; chip water content in the range of 300 -500 μg/g after drying, spinning temperature 282℃ , oil pick-up 1.0% , cross air height 1 800 mm and winding speed 3 500 m/min.
Keywords:polyhexamethylene adipamide fiber  fully drawn yarn  spinning  technological process
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号