首页 | 本学科首页   官方微博 | 高级检索  
     

用ICP-AES法测定三碳酸铀酰铵中的钛
引用本文:彭洪,贺江明,郑小勇,陈立泉. 用ICP-AES法测定三碳酸铀酰铵中的钛[J]. 铀矿冶, 2012, 31(2): 86-88
作者姓名:彭洪  贺江明  郑小勇  陈立泉
作者单位:中核抚州金安铀业公司,江西抚州,344300
摘    要:采用ICP-AES法测定三碳酸铀酰铵中杂质钛的含量。硝酸分解样品、色层柱分离铀基体后,用ICP-AES法测定钛。方法加标回收率为95.2%~99.5%,RSD小于4.10%。方法简便、快速,可满足三碳酸铀酰铵中钛含量的例行分析要求。

关 键 词:ICP-AES法  三碳酸铀酰铵    测定

Determination of titanium content in ammonium uranyl tricarbonate by ICP-AES method
PENG Hong , HE Jiang-ming , ZHENG Xiao-yong , CHEN Li-quan. Determination of titanium content in ammonium uranyl tricarbonate by ICP-AES method[J]. Uranium Mining and Metallurgy, 2012, 31(2): 86-88
Authors:PENG Hong    HE Jiang-ming    ZHENG Xiao-yong    CHEN Li-quan
Affiliation:(Fuzhou Jin’an Uranium Co.,Ltd.,CNNC,Fuzhou 344300,China)
Abstract:Titanium content in ammonium uranyl carbonate was determined by ICP-AES.Samples were dissolved with nitric acid,and uranium matrix was separated through the chromatographic column.The recovery of the method was 95.2%-99.5%,and the relative standard deviation was less than 4.10%.The method is simple and rapid.
Keywords:ICP-AES method  ammonium uranyl tricarbonate  titanium  determination
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号