| 固体颗粒介质拉深新工艺及成形模具设计 |
| |
| 引用本文： | 张凌云,袁海环.固体颗粒介质拉深新工艺及成形模具设计[J].锻压技术,2010,35(1). |
| |
| 作者姓名： | 张凌云 袁海环 |
| |
| 作者单位： | 沈阳航空工业学院辽宁省数字化工艺仿真与试验技术重点实验室,辽宁,沈阳,110136 |
| |
| 摘 要： | 鉴于传统的充液拉深中存在液体介质密封困难、装置复杂等问题,提出了以固体颗粒代替液体介质的新工艺,通过对拉深过程中筒壁的受力分析得出固体颗粒介质拉深新工艺可以有效的减小成形过程中筒壁的拉应力,有利于提高材料的成形极限。自行设计了试验模具,通过对LY12M板料的拉深试验,验证了固体颗粒介质拉深新工艺的可行性,试验获得的极限拉深系数达到了0.51,优于传统刚性模拉深工艺。
|
| 关 键 词： | 固体颗粒 拉深 模具设计 |
New technology of solid granule medium deep drawing and forming die design |
| |
| ZHANG Ling-yun,YUAN Hai-huan.New technology of solid granule medium deep drawing and forming die design[J].Forging & Stamping Technology,2010,35(1). |
| |
| Authors: | ZHANG Ling-yun YUAN Hai-huan |
| |
| Affiliation: | Liaoning Key Lab of Digital Processes Simulation and Test Technology;Shenyang Institute of Aeronautical Engineering;Shenyang 110136;China |
| |
| Abstract: | Considering the difficult seal of liquid media and complex installation etc.existing in the traditional hydro-mechanical deep drawing,a new process was proposed,which replaced the original liquid medium with the solid granules to solve these problems.Force analysis in the drawing process reveals that the new technology of solid granulemedium deep drawing can effectively reduce tensile stress in the forming process,and it is helpful to improve material formability.Through the experiment of the LY12M sheet wi... |
| |
| Keywords: | solid granules deep drawing die design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
