| 虚拟样机技术在门座起重机设计中的应用 |
| |
| 引用本文： | 李文杰,杨艳芳.虚拟样机技术在门座起重机设计中的应用[J].湖北工业大学学报,2009,24(4):46-48. |
| |
| 作者姓名： | 李文杰 杨艳芳 |
| |
| 作者单位： | 1. 长江船舶设计院,湖北,武汉,430062
2. 武汉理工大学物流工程学院,湖北,武汉,430063 |
| |
| 摘 要： | 分析门座起重机设计的现状,结合虚拟样机技术、参数化建模技术实现门座起重机的三维参数化建模,并应用虚拟装配技术生成整机系统的虚拟样机模型;通过对门座起重机虚拟样机的建模分析,为起重机有限元动力学分析提供精确的模型,减少设计开发成本.
|
| 关 键 词： | 虚拟样机 参数化建模 虚拟装配 门座式起重机 |
Application of Virtual Prototype Technology in the Portal Jib Ctane Design |
| |
| LI Wen-jie,YANG Yan-fang.Application of Virtual Prototype Technology in the Portal Jib Ctane Design[J].Journal of Hubei University of Technology,2009,24(4):46-48. |
| |
| Authors: | LI Wen-jie YANG Yan-fang |
| |
| Affiliation: | LI Wen-jie1,YANG Yan-fang2(1 Changjiang Ship Design Institute,Wuhan 430062,China,2 School of Logistics Enign.,Wuhan Univ.of Technology,Wuhan 430063,China) |
| |
| Abstract: | This paper has analyzed the situation where the two-dimensional design can't meet the demands of the portal jib crane's designing.By combining virtual prototype technology with parametric modeling technology,the author has built a 3D parameterized model of the portal jib crane.A virtual prototype model is set for the whole system with the application of virtual assembly technology.Through the modeling analysis of the crane's virtual prototype,an accurate model is provided for the crane's finite element dyna... |
| |
| Keywords: | virtual prototype parametric modeling virtual assembly portal jib crane |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
