Effective Density Characterization of Soot Agglomerates from Various Sources and Comparison to Aggregation Theory |
| |
| Authors: | Jenny Rissler Maria E. Messing Azhar I. Malik Patrik T. Nilsson Erik Z. Nordin Mats Bohgard |
| |
| Affiliation: | 1. Ergonomics and Aerosol Technology, Lund University, Lund, Swedenjenny.rissler@design.lth.se;3. Solid State Physics, Lund University, Lund, Sweden;4. Ergonomics and Aerosol Technology, Lund University, Lund, Sweden;5. Department of Energy and Process Engineering (EPT), Norwegian University of Science and Technology (NTNU), Trondheim, Norway |
| |
| Abstract: | Soot particle (black carbon) morphology is of dual interest, both from a health perspective and due to the influence of soot on the global climate. In this study, the mass-mobility relationships, and thus effective densities, of soot agglomerates from three types of soot emitting sources were determined in situ by combining a differential mobility analyzer (DMA) and an aerosol particle mass analyzer (APM). High-resolution transmission electron microscopy was also used. The soot sources were diesel engines, diffusion flame soot generators, and tapered candles, operated under varying conditions. The soot microstructure was found to be similar for all sources and settings tested, with a distance between the graphene layers of 3.7–3.8 Å. The particle specific surface area was found to vary from 100 to 260 m2/g. The particle mass-mobility relationship could be described by a power law function with an average exponent of 2.3 (±0.1) for sources with a volatile mass fraction <10% and primary particle sizes of 11–29 nm. The diesel exhaust from a heavy duty engine at idling had a substantially higher volatile mass fraction and a higher mass-mobility exponent of 2.6. The mass-mobility exponent was essentially independent of the number of primary particles in the range covered (Npp = 10–1000). Despite the similar exponents, the effective density varied substantially from source to source. Two parameters were found to alter the effective density: primary particle size and coating mass fraction. A correlation was found between primary particle size and mass-mobility relationship/effective density and an empirical expression relating these parameters is presented. The effects on the DMA-APM results of doubly charged particles and DMA agglomerate alignment were investigated and quantified. Finally, the dataset was compared to three theoretical approaches describing agglomerate particles’ mass-mobility relationship.Copyright 2013 American Association for Aerosol Research |
| |
| Keywords: | |
|
|
