Structure and Reactivity of Spruce Mechanical Pulp Lignins Part II. Organosolv Fractionation of Lignins in a Flow-Through Reactor |
| |
Authors: | Xiaoqi Pan Fernand Pla Dominique Lachenal Catherine Lapierre Bernard Monties |
| |
Affiliation: | Pulp and Paper Research Institute of Canada , 570 St. John's Boulevard Pointe Claire, Quebec, Canada , H9R 3J9 |
| |
Abstract: | Various spruce mechanical pulps were subjected to delignification with ethanol-water (1 : 1, v / v ) containing 0.1 M acetic acid at 175°C in a flow- through reactor. A thermomechanical pulp (TMP) and the corresponding samples derived from its bleaching (BTMP) and yellowing ( YBTMP ) treatments were delignified to a similar extent, about 70% of delignification degree, as compared with spruce wood. A series of five successive lignin fractions was recovered from each pulp sample and then characterized by various analytical methods. Large structural variations were observed within these fractions. The number of phenolic structures appeared to be an important factor influencing the dissolution of lignins in the ethanol-water medium. These lignin fractions were found to be different in the amount of β-aryl ether structures and in the relative importance of main carbon-carbon bonding patterns. The results are discussed in relation to the lignin fractionation in the flow-through reactor. |
| |
Keywords: | Wood kraft pulp ECF pulp TCF pulp Quinone–phenol groups Bleaching Chromophores |
|
|