| 高速线材精轧机稀油润滑站技术改造 |
| |
| 引用本文： | 徐纪成,赵永清.高速线材精轧机稀油润滑站技术改造[J].轧钢,2007,24(6):66-68. |
| |
| 作者姓名： | 徐纪成 赵永清 |
| |
| 作者单位： | 江苏江阴华西钢铁公司高线厂,江苏,江阴,214421 |
| |
| 摘 要： | 介绍了华西钢铁公司高线精轧机润滑系统的结构特点，同时分析了该系统存在的备用泵频繁启动、过滤器滤芯易损坏、供油温度过高等问题产生的原因。通过采取相应的改进措施，使问题得到了解决。
|
| 关 键 词： | 高速线材轧机 精轧机 润滑 润滑站 技术改造 |
| 文章编号： | 1003-9996（2007）06-0066-03 |
| 收稿时间： | 2007-05-15 |
| 修稿时间： | 2007年5月15日 |
Technique Reformation of Oil Lubrication System of High-speed Wire Rod Mill |
| |
| XU Ji-cheng,ZHAO Yong-qing.Technique Reformation of Oil Lubrication System of High-speed Wire Rod Mill[J].Steel Rolling,2007,24(6):66-68. |
| |
| Authors: | XU Ji-cheng ZHAO Yong-qing |
| |
| Abstract: | The structure characteristics of lubrication system of high-speed wire rod finishing mill of Huaxi Iron Steel Co. was introduced. Meanwhile, the existing problems of production, such as frequency starting of spare pump, easy failure of filter, and high temperature of oil, were analyzed, and some countermeasures were put for ward. |
| |
| Keywords: | high-speed wire rod mill finishing mill lubrication lubrication system technique reformation |
| 本文献已被 维普 万方数据 等数据库收录！ |
