| 小议衬套壁厚公差与壁厚差 |
| |
| 引用本文： | 严金龙 徐君萍. 小议衬套壁厚公差与壁厚差[J]. 山东内燃机, 2004, 0(2): 40-41 |
| |
| 作者姓名： | 严金龙 徐君萍 |
| |
| 作者单位： | 杭州轴瓦有限公司 浙江杭州310004(严金龙)，杭州轴瓦有限公司 浙江杭州310004(徐君萍) |
| |
| 摘 要： | 本文采用实际例子叙述有关汽车发动机衬套壁厚公差与壁厚差之间的相互联系及区别，便于生产厂家的组织生产和主机厂的进货验收，以供同行参考。
|
| 关 键 词： | 衬套 壁厚公差 壁厚差 |
Discussion About Wall Thickness Tolerance and Wall Thickness Difference of Bushing |
| |
| Yan Jinlong,Xu Junping. Discussion About Wall Thickness Tolerance and Wall Thickness Difference of Bushing[J]. Shandong Internal Combustion Engine, 2004, 0(2): 40-41 |
| |
| Authors: | Yan Jinlong Xu Junping |
| |
| Abstract: | The paper describes interrelation and differentiation about wall thickness tolerance and wall thickness difference of automobile motor bushing with practical example, so that it can help producing department organization producing and motor factory control reception. |
| |
| Keywords: | Bushing Wall Thickness Tolerance Wall Thickness Difference |
| 本文献已被 CNKI 维普 等数据库收录！ |
