首页 | 本学科首页   官方微博 | 高级检索  
     

耐磨胶粘涂层的动态吸湿过程研究
引用本文:郭源君,文建国,谢献忠,刘泽军.耐磨胶粘涂层的动态吸湿过程研究[J].复合材料学报,1999,16(2):52-56.
作者姓名:郭源君  文建国  谢献忠  刘泽军
作者单位:1.湘潭工学院基础科学部, 湖南湘潭 411201;
基金项目:湖南省计委资助项目;;
摘    要:依据矩形试件吸湿过程的实测数据描绘出涂层材料的吸湿浓度与吸湿应变曲线, 同时利用F ick 扩散定律的有关吸湿结论进行数据处理得到了扩散系数近似值。以此为基础, 进一步分析了实用涂层的吸湿浓度变化规律及吸湿引起的内应力。结果表明, 涂层平衡吸湿浓度4% 左右, 而相对材料初始强度, 吸湿引起的内应力很小 

关 键 词:耐磨涂层    吸湿    吸湿应力
收稿时间:1998-08-12
修稿时间:1998-11-24

STUDY ON DYNAMIC ABSORBING MOISTURE PROCESS OFANTIABRASION ADHESION COATING
Guo Yuanjun,Wen Jianguo,Xie Xianzhong,Liu Zejun.STUDY ON DYNAMIC ABSORBING MOISTURE PROCESS OFANTIABRASION ADHESION COATING[J].Acta Materiae Compositae Sinica,1999,16(2):52-56.
Authors:Guo Yuanjun  Wen Jianguo  Xie Xianzhong  Liu Zejun
Affiliation:1.Xiangtan Polytechnic University;2.Huatian Corporation New Material Institute
Abstract:In this paper, using the analytical conclusion of Fick rule, the absorbing moisture process of abrasion adhesion coating material is measured. Furthermore, the dynamic absorbing moisture consistency and stress of applied coating are analyzed. The results show that the absorbing moisture property of coating is affected by the filling quantity and curing dose; the maximum absorbing moisture consistency is about 4%; relative to the initial strength, the dynamic absorbing moisture stress of coating is a small quantity.
Keywords:antiabrasion adhesion coating  absorbing moisture  absorbing moisture stress
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《复合材料学报》浏览原始摘要信息
点击此处可从《复合材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号