首页 | 本学科首页   官方微博 | 高级检索  
     

柱状缓冲空气垫动态刚度研究
引用本文:郭振斌,陈安军. 柱状缓冲空气垫动态刚度研究[J]. 包装工程, 2012, 33(5): 69-72
作者姓名:郭振斌  陈安军
作者单位:江南大学;国家轻工业包装制品质量监督检测中心
摘    要:以柱状空气垫为研究对象,给出了空气垫动态刚度与气垫动态压缩变形量、初始相对内压关系的理论模型。取不同规格初始内压相近,以及相同规格初始内压不同的空气垫,通过动态压缩试验,得到了空气垫的动态刚度,并与理论模型进行了比较。试验结果表明,动态刚度的理论预测值较试验值大,相同规格的空气垫,随初始相对内压的增加,动态刚度增大,初始内压较小时理论值与实验结果吻合较好。

关 键 词:柱状空气垫  动态刚度  理论模型  动态压缩试验
收稿时间:2011-10-26
修稿时间:2012-03-10

On Dynamic Stiffness of Cylindrical Air Cushion
GUO Zhen-bin and CHEN An-jun. On Dynamic Stiffness of Cylindrical Air Cushion[J]. Packaging Engineering, 2012, 33(5): 69-72
Authors:GUO Zhen-bin and CHEN An-jun
Affiliation:1,2(1.Jiangnan University,Wuxi 214122,China;2.China National Light Industry Package Quality Supervising and Testing Center,Wuxi 214122,China)
Abstract:Cylindrical airbag was studied and a theoretical model was proposed,which redefined the relationships among the dynamic stiffness,initial internal pressure and dynamic compression deformation.Dynamic compression test was carried out to get dynamic stiffness characteristics,through which comparison was made between the models and experimental values of different specifications and initial internal pressures.Experiment results showed that theoretical predicted value of dynamic stiffness is bigger than the tested data;dynamic stiffness increases along with the increase of initial internal pressure.Results from calculation and experiments are in good agreement when the initial internal pressure decreases.
Keywords:cylindrical airbag  dynamic stiffness  theoretical model  dynamic compression test
本文献已被 CNKI 等数据库收录!
点击此处可从《包装工程》浏览原始摘要信息
点击此处可从《包装工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号