首页 | 本学科首页   官方微博 | 高级检索  
     

实芯纯钙线在LF精炼过程中的应用
引用本文:张宝,施月明,项利,陈远清,张延和.实芯纯钙线在LF精炼过程中的应用[J].特殊钢,2011,32(5):44-46.
作者姓名:张宝  施月明  项利  陈远清  张延和
作者单位:1. 上海德司克测控技术有限公司.上海 200081; 2. 钢铁研究总院连铸技术国家工程研究中心,北京 100081; 3. 新余钢铁集团有限公司第二炼钢厂,新余 338001;
摘    要:对比分析了实芯钙线(99.35%Ca)和钙铁线(30.53%Ca)在160 t、230 t和300 t LF精炼过程应用的冶金效果。喂纯钙线前后平均钢水的酸溶铝、硫含量和温度分别为0.036%、0.010%、1 587℃和0.029%、0.008%、1584℃。与喂钙铁线相比,喂实芯纯钙线,钙的收得率提高10%,喂线量少50%,喂线时间缩短2~3 min,钢水温降减少3~5℃,具有明显的冶金效果。

关 键 词:LF精炼  钙处理  实芯纯钙线  钙铁线  
收稿时间:2011-04-08

Application of Solid-Core Pure Calcium Wire during LF Refining
Zhang Bao,Shi Yueming,Xiang Li,Chen Yuanqing,Zhang Yanhe.Application of Solid-Core Pure Calcium Wire during LF Refining[J].Special Steel,2011,32(5):44-46.
Authors:Zhang Bao  Shi Yueming  Xiang Li  Chen Yuanqing  Zhang Yanhe
Affiliation:1. Shanghai Desie Measure and Control Technology Co Ltd, Shanghai 200081 ; 2. National Engineering Research Center of Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081 ; 3. No2 Steelmaking Plant, Xinyu Iron and Steel Group Co Lid, Xinyu 338001 ;
Abstract:The metallurgical effects of solid-core calcium wire(99.35%Ca ) and CaFe wire(30.53%Ca) feeding during 160 t,230 t and 300 t LF refining process have been compared and analyzed.The average acid soluble aluminium, sulphur content and temperature of liquid before and after feeding solid-core pure calcium are respectively 0.036%, 0.010%,1 587℃and 0.029%,0.008%,1 584℃.As compared with feeding CaFe wire,with feeding solid-core calcium wire the yield of calcium increases by 10%,the feeding wire amount decreases by 50%,the feeding wire time reduces by 2~3 min and the temperature drop of liquid decreases by 3~5℃,it has obvious metallurgical effect.
Keywords:LF Refining  Calcium Treatment  Solid-Core Calcium Pure Wire  CaFe Wire  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号