非真空吹氮工艺对316L奥氏体不锈钢吸氮行为的影响

在实验室通过刚玉坩埚-硅钼棒电阻炉研究了吹氮时间(0～50 min),氮气分压(35～100kPa),吹氮流量(总流量0.3 L/min;N₂:Ar=1:3～3:1),钢液温度(1 773～1 833 K)对0.8 kg 316 L不锈钢液(%:0.031C、16.13Cr、10.12Ni、2.12Mo)中氮含量的影响。结果表明,钢中氮含量随着吹氮时间、氮分压的增加而增大,随吹氮流量增加钢液氮含量达到饱和的时间缩短,氮的溶解度随着钢液温度的降低而升高。应用热力学模型和动力学模型对实验结果进行分析。

Effect of Non-Vacuum Nitrogen Blowing Process on Nitrogen Absorption Behavior of Austenite Stainless Steel 316L

Effect of nitrogen blowing time（0～50 min）,nitrogen partial pressure（35～100 kPa）,nitrogen blowing rate（total flow rate 0.3 L/min with N₂:Ar = 1:3～3:1）,liquid temperature（1 773～1 833 K） on nitrogen content in 0.8 kg liquid of austenite stainless steel 316L（%:0.031C,16.13Cr,10.12Ni,2.12Mo） has been studied by using corundum crucible-silicon-molybdenum rod electric resistance furnace in laboratory.Results show that with increasing nitrogen blowing time and nitrogen partial pressure the nitrogen content in steel increases;with increasing blowing nitrogen rate the time that nitrogen content in liquid comes up to saturation value reduces and with decreasing liquid temperature the dissolvability of nitrogen in steel increases.Analysis on test results is carried out by using thermodynamics and kinetics models.