首页 | 本学科首页   官方微博 | 高级检索  
     

80t LF精炼特殊钢的热态返回渣的循环应用
引用本文:丁宁,秦登平,王坚,包燕平,王立峰.80t LF精炼特殊钢的热态返回渣的循环应用[J].特殊钢,2011,32(4):42-43.
作者姓名:丁宁  秦登平  王坚  包燕平  王立峰
作者单位:1. 北京科技大学冶金与生态工程学院,北京100083;首钢技术研究院,北京100043
2. 首钢技术研究院,北京,100043
3. 北京科技大学冶金与生态工程学院,北京,100083
摘    要:首钢精炼82B、40Cr、20CrMnTi、60Si2Mn等钢种采用LF循环利用热态返回渣工艺。LF使用热态还原循环渣精炼特殊钢时,补加合成渣(或活性石灰)200~400kg/炉,适当增加电石消耗量,并用铝粒、电石、硅铁粉对渣脱氧。生产实践表明,采用该工艺使精炼脱硫率达到50%以上,LF后钢水氧活度≤10×10-6,并使LF造渣料-合成渣减少5kg/t,埋弧渣减少2kg/t,冶炼成本降低7元/t。热态精炼渣具有较高的回收利用价值。

关 键 词:LF  热态精炼渣  循环利用

Reutilization of 80 t LF Hot Return Refining Slag for Special Steel
Ding Ning,Qin Dengping,Wang Jian,Bao Yanping,Wang Lifeng.Reutilization of 80 t LF Hot Return Refining Slag for Special Steel[J].Special Steel,2011,32(4):42-43.
Authors:Ding Ning  Qin Dengping  Wang Jian  Bao Yanping  Wang Lifeng
Affiliation:Ding Ning~(1,2),Qin Dengping~2,Wang Jian~2,Bao Yanping~2 and Wang Lifeng~2 (1 School of Metallurgical and Ecological Engineering,University of Science and Technology,Beijing 100083,2 Research Institute of Technology,Shougang,Beijing 100043)
Abstract:The LF hot return slag process at Shougang is reutilized to refine steels including steel 82B,40Cr, 20CrMnTi and 60Si2Mn.During refining special steels in LF with using hot reducing return slag,200~400 kg/heat of synthetic slag or active lime is added,the consumption of calcium carbide increases properly and the slag is deoxidized by aluminium shot,calcium carbide and silico-ferrite powder.Production practice shows that with using this process the refining desulphurization rate is more than 50%,after LF refining the liquid oxygen activity≤10×10-6,the LF slag making materials -synthetic slag decreases by 5kg/t steel and submerged arc slag decreases by 2 kg/t steel,and the melting cost decreases by 7 yuan/t steel.The hot refining slag has higher reutilization value.
Keywords:LF  Hot Refining Slag  Reutilization  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号