花洒手柄热流道注射模设计 |
| |
引用本文: | 杨海鹏,武晓红.花洒手柄热流道注射模设计[J].模具制造,2014(3):61-65. |
| |
作者姓名: | 杨海鹏 武晓红 |
| |
作者单位: | 江门职业技术学院,广东江门529090 |
| |
摘 要: | 分析了花洒手柄塑件原材料、成型工艺及结构,设计了合理的模具侧抽芯机构及热流道系统。塑件质量良好,合格率接近100%。模具运动平稳,脱模顺畅,热流道系统使用正常,维修率低,模具设计与制造达到了预期效果。
|
关 键 词: | ABS塑料 注射模 侧抽芯 热流道 |
Design of Hot Runner Injection Mold for the Shower Head Handle |
| |
Abstract: | Analyzed the shower head handle plastic raw material,molding process and structure, design the reasonable mold side core-pulling mechanism and hot runner system, plastic parts quality is good, the qualified rate of close to 100%. Mold the smooth movement, stripping smoothly, using normal hot runner system, low maintenance rate, mold design and produce the desired effect |
| |
Keywords: | ABS plastic injection mold side core-pulling hot runner |
本文献已被 CNKI 维普 等数据库收录! |
|