| 基于MoldFlow注射模流道优化分析 |
| |
| 引用本文： | 廖铃钢,殷燕芳. 基于MoldFlow注射模流道优化分析[J]. 模具制造, 2014, 0(2): 37-40 |
| |
| 作者姓名： | 廖铃钢 殷燕芳 |
| |
| 作者单位： | 武汉轻工大学机械工程学院,湖北武汉430023 |
| |
| 摘 要： | 为了提高一模多腔模具的设计质量和缩短设计周期,先采用传统经验及公式设计模具的浇注系统,再基于MoldFlow 2010进行浇口位置优化分析与流道平衡分析,进而优化模具流道设计。
|
| 关 键 词： | 浇口位置 流道平衡 模具优化 |
Optimization Analysis of Injection Mold Runner Based on MoldFlow |
| |
| Abstract: | In order to improve the quality of multi-cavity injection mold design and shorten the design cycle, First we should design mold gating system by the traditional experience and formula. Then we can choose gate location optimization analysis and runner balance analysis based on MoldFlow 2010 to optimize the design of the MoldFlow. |
| |
| Keywords: | gate location runner balance mold optimization |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
