| 铣削加工过程的智能多目标优化方法 |
| |
| 引用本文： | 彭观 陈统坚. 铣削加工过程的智能多目标优化方法[J]. 机械制造, 1999, 37(3): 21-23 |
| |
| 作者姓名： | 彭观 陈统坚 |
| |
| 作者单位： | 华南理工大学!广州510641 |
| |
| 基金项目： | 广东省自然科学基金资助项目 |
| |
| 摘 要： | 采用神经网络和专家系统的方法，实现带宽容分层约束的铣削加工过程多目标优化，利用Ｂｏｌｔｚ－ｍａｎｎ机神经网络求妥各层次的多目标优化问题，利用专家系统控制进程。通过实例证明了系统优化求解的有效性。
|
| 关 键 词： | 多目标优化 铣削加工 神经网络 专家系统 |
Intelligent Multiobjective Optimization of Milling Process |
| |
| Peng Guan et al. Intelligent Multiobjective Optimization of Milling Process[J]. Machinery, 1999, 37(3): 21-23 |
| |
| Authors: | Peng Guan et al |
| |
| Affiliation: | Peng Guan et al |
| |
| Abstract: | The multiobjective optimization of the milling process can be accomplished by the layer constraint method using the neutral network and expert system. The mulitobjective optimization of each layer can be solved by Boltamann neutral network,while the optimization process can be controlled by the expert system. Besides,a case study is given to prove the validity of this method for system optimization. |
| |
| Keywords: | Multiobjective Optimization Milling Process Neural Network Expert System |
| 本文献已被 CNKI 维普 等数据库收录！ |
